SilentLift is the only damping element for decoupling of the guide rails on the whole market:
- With TÜV certification
- That isolates on the technically correct area --> towards the mass (wall)
- That reduces the speed of sound verifiably (confirmed by certified noise control testing facility VMPA, DIN 4109)
- That uses the most effective damping material which was calculated by expert reports.
The SilentLift damping elements consist of two steel plates, wall holding plate and rail holding clamp plate that were connected with an elastic damping layer which consists of a special polyurethane. The safety brackets as metal stops, that are fixed on the wall plate, ensure the safety, even by a total failure of the damping layer.
Warranty: 2 years
|Period of application||30 years|
|Temperature application range||[-40; +90] °C|
|Polyurethane||Used for damping layer; UV resistant; Resistant to oil and grease; Resistant to hydrolytic influences; Not suitable for exterior use|
|Steel||Used for wall, guide bracket plate and the brackets|
The SilentLift damper components may be used in lifts that are fitted and operated centrally!
Limitations: Permissible load for damper components SilentLift
|Silent-model||Drive and load||Safety stop|
|Fx||Fx x lx||Fy||Fx||Fx x lx||Fy|
Orthogonal force +Fy on the element are not critical and do not have to be observed for calculation oft he damper components.
*Orthogonal force -Fy e.g. application on counterweight-bracket